About Powder Technology Center

Regarding each operation like storage, discharge transfer, weighing etc of powder and granular at this Technology center,
we provide a product such as Solution for the issues faced by the customers.

Frequently asked questions




Rotary Valve

Is the raw material clogging?

Worried about sticking to the rotor.

Is discharge possible, as the upper and lower differential pressure is more?

Crusher

Can detangle the chicken for salad?

Want to separate the squeezed pomace and seeds of grapes

Want to disperse the fat content in the powder.

Small pneumatic transfer system

Transfer of raw material which is extremely high in adherability.

Want a easy-to-clean device.

Want a device that consumes less air.

Pneumatic transfer system

Not sure whether suction transfer or pressure feed.

Want to test in a facility where EURAC is actually used.

High density transfer system.

Is it possible to transfer wet material continuously?

Searching for a device that can be easily cleaned internally.

Want to transfer with a low pressure

High-precision weighing device

Want to test whether capability can be seen with the precision of ±2g

Want to weigh flushing raw material.

Table discharger

Want a table feeder where internal part can be seen.

Want to automate powder material that could not be automated in the past.

Mixer (Ribbon mixer)

Is scale up for existing equipment of 3000L possible by test equipment?

Don’t want to use gasket to powder-contact part.

Cross-link prevention, segregation of hopper

Can we get consultation in case of segregation problem?

Is it possible to actually test and measure the particle size distribution?

Screw conveyor (Feeder)

Want to know the relation between the tilt and rotation frequency

Want to know the damage to the raw material, if transferred.

List of Technology Center Facilities

Facililty
Type
TAG
No.
Machine name Type, dimensions, configuration Specifications Purpose of test Caliber
Supply
Discharge

Rotary Valve
Type RMC-150S-OS Hopper capacity is
71ℓ〜104ℓ
Confirmation of discharging ability
from hopper
150A
RMC-200N-OM 200A
RA-200S-WHPS □200

Sanitary
Rotary valve
Type SMC-150S-OS Hopper capacity is
71ℓ〜104ℓ
Confirmation of discharging ability
from hopper
150A
SMC-200S-OS 200A
DSXM-150S-OS 150A
DSXM-200S-OS 200A

Blow-through type
rotary valve
Type BA-200N-OS In the pneumatic transfer line,
confirmation of pressure retention
Confirmation of transferring ability
□200
65A

Rotary valve with scraper
Type SSCA-200S-OS Hopper capacity is
71ℓ〜104ℓ
Confirmation of discharging ability
from hopper
Confirmation of effect of prevention of adherence
□200

Sanitary flap
damper(Double)
Type SWDA-150S Hopper capacity is
71ℓ〜104ℓ
Cyclone
Confirmation of discharging ability
from hopper
Confirmation of pressure retention
at pneumatic transfer line
150A

Cross feeder
Type CRF-1000S Hopper capacity is
269ℓ〜670ℓ
Confirmation of supply capacity
Effect of cross-link prevention
Effect of segregation prevention
φ700

Cross
Discharger
Type CRD-1000S Hopper capacity is
1000ℓ
Confirmation of discharging capacity
Effect of cross-link prevention
Effect of segregation prevention
φ1000

Hopper
Binal Feeder
Type HBF-150S Hopper capacity is
71ℓ〜104ℓ
Confirmation of effect of cross-link prevention
Confirmation of supply capacity
150A
5S

Screw
Feeder
Type SF-100S Hopper capacity is
100ℓ
Confirmation of supply capacity 4.5S(100A)
Equipment
type
TAG
No.
Equipment name Type, dimensions, configuration Specifications Purpose of test Caliber
Supply
Discharge

Screw conveyor
Type SC-W200×2000L Hopper capacity is
71ℓ〜104ℓ
Confirmation of transport capacity Width 200mm
Vibrator feeder Type 56C
(Trough W250mm×ℓ950mm)
Confirmation of supply capacity 250mm
Cross-link
prevention

Bin scraper
Type HBS-150S(Cast metal) Hopper capacity is
71ℓ〜104ℓ
Confirmation of effect of cross-link prevention 150A
HBS-150S(Plate working) 150A
HBSー200S(Plate working) 200A
Air vibrator Type PLB Hopper capacity is
71ℓ〜104ℓ
Confirmation of effect of cross-link prevention
Confirmation of effect of adherence prevention
150A
(Hopper)
200A
(Hopper)
EPV35L
Airlation Pad Type 5201B
Air knocker Type RKD40PA

Air Sweep
Type VA-06-TRI-TRI
Storage Straight body type hopper Dimensions φ700mm×h700mm
φ1000mm×h1280mm
Hopper capacity is
269ℓ
Confirmation of discharge conditions
Hopper capacity is
1000ℓ
Taper type
hopper
Dimensions φ700-φ1000mm×h700mm Hopper capacity is
401ℓ
Confirmation of discharge conditions
Equipment
type
TAG
No.
Equipment name Type, dimensions, configuration Specifications Purpose of test Caliber
Storage Cone type hopper Dimensions φ700mm×h450mm
φ700mm×h500mm
Hopper capacity is
71ℓ〜104ℓ
Confirmation of discharge conditions 200A
150A
Pneumatic
transfer
D
BOXER
Type X M-1~M-5 Pipe material :SUS/Resin hose
Transfer height:4m
Transfer distance:20m
Suction type pneumatic transfer
Confirmation of pneumatic transfer capacity
Confirmation of crushing conditions for non-target product
1.5S、2S
X-1 M-1~M-5
XF M-5
*Blower type
Vacuum pump type
A
ABP
(Aishin blowpod)
Type ABP-30S
Effective capacity:30ℓ
Material: Direct Powder-contact part SUS304, EPDM
Pipe material: SUS/Resin hose
Transfer height:4m
Transfer distance:20m
Medium pressure medium density pneumatic transfer
Confirmation of pneumatic transfer capacity
Confirmation of crushing conditions for non-target product
1.5S、2S
B Suction type, pressure fed type
low pressure pneumatic transfer
Configuration Roots blower+
Rotary valve supply
(Screw feeder supply)
Pipe material: SUS/Resin hose
Transfer height:4m
Transfer distance:50m
Pressure feed type
Confirmation of pneumatic transfer capacity
Confirmation of crushing conditions for non-target product
65A
Crushing
Millling

Comb blade type crusher
Type SKC-150S Rotor: flat blade, demon blade
Fix blade:1 type
Crushing particle size
Confirmation of process capability
SKC-200S
SKCL-500S
HR-C 300RR 300A

Screen type
Crusher
Type SKS-150S Rotor :Beater type
Screen :Variety of types
Crushing particle size
Confirmation of process capability
150A
SKS-200S 200A
Uni-Mill
(Vertical cone mill)
Type M20-U Rotor :Impeller type
Screen: Variety of types
Confirmation of crushing particle size process capability
Weighing E
AISHIN
Precision weighing system
Type ADS-125H Weighing range:1kg〜25kg
Weighing accuracy:±1g
Weighing range:1kg〜25kg
Horizontal
Weighing capacity, accuracy confirmation
Vertical
125A
ADS-150H 150A
ADS-200H 200A
ADS-125V 125A

CO.RA
Double valve
Type DVG150RR Weighing range:1kg〜25kg
Weighing precision:±100g
Confirmation of weighing capacity, accuracy 150A
Equipment
type
TAG
No.
Equipment name Type, dimensions, configuration Specifications Purpose of test Caliber
Weighing Screw
Feeder type
Type SF-100S Weighing range:1kg〜25kg
Weighing precision:±100g
Confirmation of weighing capacity, accuracy 4.5S(100A)
Mixing C
Ribbon mixer
Type ARM-100S Effective capacity:100ℓ Confirmation of mixing effect
Confirmation of residue after discharge
Sorting Magne-rotor Type RMM-150S Confirmation of sorting effect
Confirmation of discharge capacity from hopper
150A
Others
Ball diverter
valve
Type DBXA-40SA Confirmation of transfer 40A
DBXA-50SA 50A
DBXA-65SA 65A

Ball diverter
valve
Type GVXA-150S Confirmation of discharge existence
Confirmation of discharging capacity
150A
GVXA-200S 200A
GVX-150S 150A
GVX-200S 200A

BFM fitting
Type Each type Confirmation of sealing, transfer φ150〜
φ200
Flow site Type Each type 32A(1.5S)、
50A(2S)、
65A

STIF EURAC
Coupling
Type Type L/M/HL Confirmation of sealing, transfer 32A、40A、
50A、65A
1.5S、2.0S、
2.5S