Sanitary rotary valve (Standard type)

Features

  • Cleaning time can be reduced, as it can be dismantled and reassembled in short time
  • A structure where standard blow through is the base and single side stuffing box can be opened
  • Rotor removal is easy
  • It is ideal while handling high adhesive powder and granular and in case of frequent product change over
  • Material can be selected from cast iron, stainless cast

Specifications

Sanitary blow through rotary valve discharge performance and applicable motor capacity table

Model – Connecting caliber diameter Dimensions between the surfaces   Rotor diameter Number of blades Rotor capacity 〔L/rev〕(theoretical volume) Theoretical discharge quantity〔㎥/h〕 With applicable speed reducer
□SMor□SA-□□ Face-to-face Dimension 〔mm〕   Rotor Volume〔L/rev〕(Theretical) Theoretical Discharge〔㎥/h〕      Motor〔kW〕
Model-Diameter Round flange Square flange Rotor Diameter № of
Blades
Open (O) type Pocket (P) type Molded rubber (F) type Open (O) type  Pocket (P) type  Molded rubber (F) type  With Reducer
□SMor□SA-□□ Round type Square type 〔mm〕   Open(O) Poket(P) Molded Rubber(F) Open(O)  Poket(P)  Molded Rubber(F) Motor〔kW〕
                10min-1 20min-1 30min-1 10min-1 20min-1 30min-1 10min-1 20min-1 30min-1  
SM-50 190 - 100 6 0.35 0.26 0.25 0.21 0.42 0.63 0.16 0.31 0.47 0.15 0.30 0.45 0.1~
SM-80 230 - 125 8 0.9 0.58 0.63 0.54 1.08 1.62 0.35 0.70 1.04 0.38 0.76 1.13 0.2~
SM/SA-100 270 270 150 8 1.8 1.2 1.1 1.08 2.16 3.24 0.72 1.44 2.16 0.66 1.32 1.98 0.2~
SM-125 300 - 175 8 2.8 2.5 - 1.68 3.36 5.04 1.50 3.00 4.50 - - - 0.4~
SM/SA-150 330 330 200 8 4.6 3.6 3 2.76 5.52 8.28 2.16 4.32 6.48 1.80 3.60 5.40 0.4~
SMR/SAR-200 330 330 200 8 5.5 4.3 4.2 3.30 6.60 9.90 2.58 5.16 7.74 2.52 5.04 7.56 0.4~
SM/SA-200 380 380 250 8 9.4 6.7 6.4 5.64 11.28 16.92 4.02 8.04 12.06 3.84 7.68 11.52 0.4~
SM/SA-250 440 440 300 8 16 12 12.5 9.6 19.2 28.8 7.2 14.4 21.6 7.5 15.0 22.5 0.75~
SM/SA-300 490 490 350 10 25 20 21.3 15.0 30.0 - 12.0 24.0 - 12.8 25.6 - 0.75~

*Theoretical discharge quantity means the discharge quantity at the time of 100% filling efficiency.

Structural diagram

図

Outer dimensions diagram

DSM/DSA-□□-□□□

図

Dimension unit: mm

Model A
(Caliber Diameter)
H K L F
(Single shaft)
(Single-side bearing)
R
(Dual-side bearing)
B P N-φD Approx. mass (kg)
Approximate weight(㎏)
DSM-80 80 230 320 395 135 210 - - - 60
DSM/DSA-100 100 270 415 460 150 220 200 55 12-12 70
DSM-125 125 300 415 495 155 235 - - - 80
DSM/DSA-150 150 330 415 510 170 250 250 70 12-14 100
DSMR/DSAR-200 200 330 445 550 195 275 300 85 12-14 120
DSM/DSA-200 200 380 445 550 195 275 300 85 12-14 140
DSM/DSA-250 250 440 515 585 220 300 350 103 12-14 180
DSM/DSA-300 300 490 515 695 245 325 400 120 12-14 230

SM/SA-□□-□□□

図

Dimension unit: mm

Model A
(Caliber Diameter)
H K L F
(Single-side bearing)
R
(Dual-side bearing)
B P N-φD Approx. mass (kg)
Approximate weight(㎏)
SM-80 80 230 400 340 135 210 - - - 60
SM/SA-100 100 270 410 350 150 220 200 55 12-12 70
SM-125 125 300 415 370 155 235 - - - 80
SM/SA-150 150 330 430 400 170 250 250 70 12-14 100
SMR/SAR-200 200 330 430 430 195 275 300 85 12-14 120
SM/SA-200 200 380 460 430 195 275 300 85 12-14 140
SM/SA-250 250 440 490 480 220 300 350 103 12-14 180
SM/SA-300 300 490 560 510 245 325 400 120 12-14 230