Sanitary rotary valve (Blow through type)

Features

  • The structure is such that it is with the base of standard type blow through and can open stuffing box on side
  • Rotor removal is easy
  • It is suitable while handling highly adhesive powder and granular and if product change over is frequent
  • Material can be selected from cast iron, stainless cast

Specifications

Sanitary blow through rotary valve discharge efficiency and applicable motor capacity table

Model – Connecting caliber diameter Dimensions between the surfaces Rotor diameter Number of blades Rotor capacity 〔L/rev〕(theoretical volume) Theoretical discharge quantity 〔㎥/h〕 With applicable speed reducer
□SBA-□□ Face-to-face
Dimension
〔mm〕   Rotor Volume〔L/rev〕(Theretical) Theoretical Discharge〔㎥/h〕   Motor〔kW〕
Model-Diameter Square flange Rotor Diameter № of
Blades
Open (O) type Molded rubber (F) type Open (O) type  Molded rubber (F) type  With Reducer
□SBA-□□ Square type 〔mm〕   Open(O) Molded Rubber(F) Open(O)  Molded Rubber(F) Motor〔kW〕
            10min-1 20min-1 30min-1 10min-1 20min-1 30min-1  
SBA-150 350 200 8 4.6 3 2.76 5.52 8.28 1.80 3.60 5.40 0.4~
SBA-200 440 250 8 9.4 6.4 5.64 11.28 16.92 3.84 7.68 11.52 0.4~
SBA-250 470 300 8 16 12.5 9.6 19.2 28.8 7.5 15.0 22.5 0.75~
SBA-300 535 350 10 25 21.3 15.0 30.0 - 12.8 25.6 - 0.75~

*Theoretical discharge quantity means the discharge quantity at the time of 100% filling efficiency.

Structural diagram

図

Outer dimensions diagram

SBA-□□-□□□

図

Dimension unit: mm

Model A
(Caliber Diameter)
B P N-φD C H L F K Transfer pipe size (Refer) Approx. mass (kg)
Transportation  pipe size(Reference) Approximate weight(㎏)
SBA-150 150 250 70 12-14 277 350 500 350 540 65A 120
SBA-200 200 300 85 12-14 338 440 550 375 605 80A 140
SBA-250 250 350 103 12-14 363 470 600 400 630 100A 200
SBA-300 300 400 120 12-14 423 535 650 450 670 125A 230

*C dimension value changes by transfer pipe size.